Cisco 7941G Administration Guide - Page 146

Security Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-17 Trust List Menu Settings Option CAPF Server CallManager/ TFTP Server SRST Router Description To Change IP address of the CAPF used by the phone. Also displays a certificate icon if a certificate is installed for this server. For more information about this file, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. IP address of up to five Cisco Unified Communications Manager and TFTP servers used by the phone. Also displays a certificate icon if a certificate is installed for this server. For more information about this file, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. IP address of the trusted SRST router that is available to the phone, if such a device has been configured in Cisco Unified Communications Manager Administration. Also displays a certificate icon if a certificate is installed for this server. For more information about this file, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. 802.1X Authentication and Status The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X authentication and monitor its progress. These options are described in Table 4-18 and Table 4-19. You can access the 802.1X Authentication settings by pressing the Settings button and choosing Security Configuration > 802.1X Authentication. To exit these menus, press the Exit softkey. 4-50 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01