Cisco 7941G Administration Guide - Page 147
Authentication > Device, Settings > Security - cp r
UPC - 746320949420
View all Cisco 7941G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Security Configuration Menu Table 4-18 802.1X Authentication Settings Option Device Authentication EAP-MD5 Description To Change Determines whether 802.1X authentication is enabled: • Enabled-Phone uses 802.1X authentication to request network access. • Disabled-Default setting in which the phone uses CDP to acquire VLAN and network access. 1. Choose Settings > Security Configuration > 802.1X Authentication > Device Authentication. 2. Set the Device Authentication option to Enabled or Disabled. 3. Press the Save softkey. Specifies a password for use with 802.1X Authentication by using the following menu options (described in the following rows): Choose Settings > Security Configuration > 802.1X Authentication > EAP-MD5. • Device ID • Shared Secret • Realm Device ID-A derivative of the phone's model number and unique MAC address displayed in this format: CP--SEP- Display only-Cannot configure. Shared Secret-Choose a password to use on the phone and on the authentication server. The password must be between 6 and 32 characters, consisting of any combination of numbers or letters. Note If you disable 802.1X authentication or perform a factory reset of the phone, the shared secret is deleted. 1. Choose EAP-MD5 > Shared Secret. 2. Enter the shared secret. 3. Press Save. See the "Troubleshooting Cisco Unified IP Phone Security" section on page 9-12 for assistance in recovering from a deleted shared secret. Realm-Indicates the user network Display only-Cannot configure. domain, always set as Network. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 4-51