Cisco 7941G Administration Guide - Page 220
Indicates whether Link Layer Discovery Protocol LLDP is enabled
UPC - 746320949420
View all Cisco 7941G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Network Configuration Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Table 8-2 Network Configuration Area Items (continued) Item Auto Line Select DSCP for Call Control DSCP for Configuration DSCP for Services Security Mode Web Access Enabled Span to PC Port PC VLAN CDP: PC Port CDP: SW Port LLDP-MED: SW Port LLDP: PC Port LLDP Power Priority LLDP Asset ID Description Indicates whether the phone shifts the call focus to incoming calls on all lines. DSCP IP classification for call control signaling. DSCP IP classification for any phone configuration transfer. DSCP IP classification for phone-based services. Displays the security mode that is set for the phone. Indicates whether web access is enabled (Yes) or disabled (No) for the phone. Indicates whether the phone will forward packets transmitted and received on the network port to the access port. VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC. Indicates whether CDP is supported on the PC port. Indicates whether CDP is supported on the switch port. Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery (LLDP-MED) is enabled on the switch port. Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC port. Advertises the phone's power priority to the switch, enabling the switch to appropriately provide power to the phones. Settings include: • Unknown-default • Low • High • Critical Identifies the asset ID assigned to the phone for inventory management. 8-10 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01