Cisco 7941G Administration Guide - Page 109

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Network Configuration Menu Table 4-2 Network Configuration Menu Options (continued) Option SW Port Configuration Description To Change Speed and duplex of the network port (labeled 10/100 SW on the 7961G and 7941G; labeled 10/100/100 SW on the 7961G-GE and 7941G-GE). Valid values: • Auto Negotiate 1. Unlock network configuration options. 2. Scroll to the SW Port Configuration option and then press the Edit softkey. • 10 Half-10-BaseT/half duplex • 10 Full-10-BaseT/full duplex • 100 Half-100-BaseT/half duplex • 100 Full-100-BaseT/full duplex 3. Scroll to the setting that you want and then press the Select softkey. 4. Press the Save softkey. • 1000 Full-1000-BaseT/full duplex If the phone is connected to a switch, configure the port on the switch to the same speed/duplex as the phone, or configure both to auto-negotiate. If you change the setting of this option, you must change the PC Port Configuration option to the same setting. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 4-13