Cisco 7941G Administration Guide - Page 137

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Table 4-14 Network Configuration Menu Options Option Load Server RTP Control Protocol Description To Change Used to optimize installation time for phone firmware upgrades and offload the WAN by storing images locally, negating the need to traverse the WAN link for each phone's upgrade. You can set the Load Server to another TFTP server IP address or name (other than the TFTP Server 1 or TFTP Server 2) from which the phone firmware can be retrieved for phone upgrades. When the Load Server option is set, the phone contacts the designated server for the firmware upgrade. From Cisco Unified Communications Manager Administration, Device > Phone > Phone Configuration. Note The Load Server option allows you to specify an alternate TFTP server for phone upgrades only. The phone continues to use TFTP Server 1 or TFTP Server 2 to obtain configuration files. The Load Server option does not provide management of the process and of the files, such as file transfer, compression, deletion, and so on. Indicates whether the phone supports the Real Time Control Protocol. Settings include: Enabled Disabled-default If this feature is disabled, several call statistic values display as 0. For additional information, see the following sections: From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. • Call Statistics Screen, page 7-16 • Streaming Statistics, page 8-14 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 4-41