Cisco 7941G Administration Guide - Page 155

Chapter 5 Configuring Features, Templates, Services, and Users Telephony Features Available for the Cisco Unified IP Phone Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Call pickup Call recording Call waiting Description Configuration Reference Allows users to redirect a call that is ringing on another phone within their pickup group to their phone. You can configure an audio and/or visual alert for the primary line on the phone. This alert notifies the users that a call is ringing in their pickup group. For more information, refer to: • Cisco Unified Communications Manager Administration Guide, "Call Pickup Group" chapter. • Cisco Unified Communications Manager Features and Services Guide, "Call Pickup Group" chapter. Allows a supervisor to record an active call. The user might hear an intermittent tone (beep tone) during a call when it is being recorded. Note The intercom feature is disabled when a call is being monitored or recorded. For more information, refer to the Cisco Unified Communications Manager Features and Services Guide, "Monitoring and Recording" chapter. Indicates (and allows users to answer) an incoming call that rings while on another call. Displays incoming call information on the phone screen. For more information, refer to the Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phones" chapter. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 5-7