Cisco 7941G Administration Guide - Page 159

Chapter 5 Configuring Features, Templates, Services, and Users Telephony Features Available for the Cisco Unified IP Phone Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Directed Call Park Direct transfer Do Not Disturb (DND) Description Configuration Reference Allows a user to transfer an active call to an available directed call park number that the user dials or speed dials. For more information refer to: • Cisco Unified Communications Manager Features and Services Guide, "Call Park and Directed Call Park" chapter. Allows users to connect two calls to each other (without remaining on the line). For more information, refer to Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phones" chapter. When DND is turned on, no audible rings occur during the ringing-in state of a call. You can configure the phone to have a softkey template with a DND softkey or a phone-button template with DND as one of the selected features. Cisco Unified Communications Manager Features and Services Guide, "Do Not Disturb" chapter. The following DND-related parameters are configurable in Cisco Unified Communications Manager Administration: • Do Not Disturb-This checkbox allows you to enable DND on a per-phone basis. Choose Device > Phone > Phone Configuration. • DND Incoming Call Alert-Choose the type of alert to play on a phone for incoming calls when DND is active. This parameter is located on both the Common Phone Profile window and the Phone Configuration window (Configuration window value takes precedence). • Include DND In BLF Status-Enables DND status to override busy/idle state. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 5-11