Cisco 7941G Administration Guide - Page 164

Chapter 5 Configuring Features, Templates, Services, and Users Telephony Features Available for the Cisco Unified IP Phone Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Join (SCCP phones only) Join Across Lines (SCCP phones only) Log out of hunt groups Malicious caller identification (MCID) (SCCP phones only) Description Configuration Reference Allows users to join two or more calls that are on one line to create a conference call and remain on the call. For more information: • See the "Configuring Softkey Templates" section on page 5-28. • Refer to Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phones" chapter. Allows users to apply the Join feature to calls that are on multiple phone lines. For more information, refer to Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phones" chapter. Allows users to log out of a hunt group and temporarily block calls from ringing their phone when they are not available to take calls. Logging out of hunt groups does not prevent non-hunt group calls from ringing their phone. For more information • See the "Configuring Softkey Templates" section on p. • Cisco Unified Communications Manager System Guide, "Understanding Route Plans" chapter. Allows users to notify the system administrator about suspicious calls that are received. For more information refer to: • Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phones" chapter. • Cisco Unified Communications Manager Features and Services Guide, "Malicious Call Identification" chapter. 5-16 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01