Cisco 7941G Administration Guide - Page 87

Chapter 3 Setting Up the Cisco Unified IP Phone Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones Only) Related Topics • Adjusting the Placement of the Cisco Unified IP Phone, page 3-13 • Verifying the Phone Startup Process, page 3-16 • Configuring Startup Network Settings, page 3-18 • Configuring Security on the Cisco Unified IP Phone, page 3-18 Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones Only) The Cisco Unified IP Phone Expansion Module 7914 attaches to a Cisco Unified IP Phone 7961G and 7961G-GE to extend the number or line appearances or programmable buttons on your phone. You can customize the button templates for the Cisco Unified IP Phone Expansion Module 7914 to determine the number of line appearances and speed dial buttons. See the "Modifying Phone Button Templates" section on page 5-27 for details. You can attach a Cisco Unified IP Phone Expansion Module 7914 to the Cisco Unified IP Phone 7961G and 7961G-GE by using one of the following methods: • When you initially add the phone to Cisco Unified Communications Manager, you can choose 7914 14-Button Line Expansion Module in the Module 1 or Module 2 fields and then choose the appropriate expansion module firmware. See Step 6 in the following procedure. • After the phone is configured in Cisco Unified Communications Manager. To configure the Cisco Unified IP Phone Expansion Module 7914 on the Cisco Unified IP Phone, follow these steps: Procedure Step 1 Step 2 Log in to Cisco Unified Communications Manager Administration. Cisco Unified Communications Manager Administration window displays. From the menu, choose Device > Phone. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 3-11