Cisco 7941G Administration Guide - Page 184

Creating Custom Phone Rings Chapter 6 Customizing the Cisco Unified IP Phone PCM File Requirements for Custom Ring Types The PCM files for the rings must meet the following requirements for proper playback on Cisco Unified IP Phones: • Raw PCM (no header) • 8000 samples per second • 8 bits per sample • uLaw compression • Maximum ring size-16080 samples • Minimum ring size-240 samples • Number of samples in the ring is evenly divisible by 240. • Ring starts and ends at the zero crossing. • To create PCM files for custom phone rings, you can use any standard audio editing package that supports these file format requirements. Configuring a Custom Phone Ring To create custom phone rings for the Cisco Unified IP Phone, follow these steps: Procedure Step 1 Step 2 Step 3 Step 4 Create a PCM file for each custom ring (one ring per file). Ensure the PCM files comply with the format guidelines that are listed in the "PCM File Requirements for Custom Ring Types" section on page 6-4. Upload the new PCM files that you created to the Cisco TFTP server for each Cisco Unified Communications Manager in your cluster. For more information, see the "Software Upgrades" chapter in Cisco Unified Communications Operating System Administration Guide. Use a text editor to edit the Ringlist.xml file. See the "Ringlist.xml File Format Requirements" section on page 6-3 for information about how to format this file and for a sample Ringlist.xml file. Save your modifications and close the Ringlist.xml file. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 6-4 OL-14620-01