Cisco 7941G Administration Guide - Page 122

Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-7 Locale Configuration Menu Options (continued) Option Network Locale Network Locale Version NTP Configuration (SIP phones only) Description To Change Network locale associated with the phone user. The network locale identifies a set of detailed information that supports the phone in a specific location, including definitions of the tones and cadences used by the phone. From Cisco Unified Communications Manager Administration, Device > Phone > Phone Configuration. Version of the network locale loaded on Display only-cannot configure. the phone. Menu to view information on NTP server and mode configuration. For more information, see NTP Configuration Menu, page 4-26. From Cisco Unified Communications Manager Administration, System > Phone NTP Reference. NTP Configuration Menu The NTP Configuration menu, which opens when you select NTP Configuration on the Locale Configuration menu, displays information about the NTP server and mode configuration used by the phone. Table 4-8 describes the options on this menu. For more information, see Locale Configuration Menu, page 4-25. Table 4-8 NTP Configuration Menu Options Option NTP Server 1 NTP Server 2 Description IP address of the primary NTP server. IP address of the secondary or backup NTP server. To Change From Cisco Unified Communications Manager Administration, System > Phone NTP Reference. From Cisco Unified Communications Manager Administration, System > Phone NTP Reference. 4-26 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01