Cisco 7941G Administration Guide - Page 123

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Table 4-8 NTP Configuration Menu Options (continued) Option NTP Mode 1 NTP Mode 2 Description To Change Primary server mode. Supported modes From Cisco Unified Communications are Directed Broadcast, Unicast, Manager Administration, Multicast, and Any cast. System > Phone NTP Reference. Secondary server mode. Supported From Cisco Unified Communications modes are Directed Broadcast, Unicast, Manager Administration, Multicast, and Any cast. System > Phone NTP Reference. UI Configuration Menu The UI Configuration menu displays the status of various user interface features on the phone. Table 4-9 UI Configuration Menu Options Option Description To Change Auto Line Select Indicates whether the phone shifts the Use Cisco Unified Communications call focus to incoming calls on all lines. Manager Administration, When this option is disabled, the phone Device > Phone > only shifts the call focus to incoming Phone Configuration. calls on the line that is in use. When this option is enabled, the phone shifts the call focus to the line with the most recent incoming call. Default: Disabled BLF for Call Lists Indicates whether the Busy Lamp Field From Cisco Unified Communications (BLF) is enabled for call lists. Manager Administration, System > Enterprise Parameters. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 4-27