Cisco CSS 11501 Getting Started Guide - Page 31
Logging in to the CSS - startup errors occurred during boot
UPC - 746320761664
View all Cisco CSS 11501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 1 Booting, Logging In, and Getting Started Logging in to the CSS Table 1-2 Status LEDs Boot Definitions (continued) State Sequence LED Color LED State 4. The CSS 11501, or a module in the CSS 11503 Green or CSS 11506, is on line and active. Solid The CSS 11501 or a module in the CSS 11503 or Red CSS 11506 (except a Fast Ethernet Module) failed. Blinking In the CSS 11503 or 11506, if: • A Fast Ethernet Module fails, all of the Link and Duplex LEDs blink simultaneously. • The master SCM in slot 1 detects a module failure, its Status LED is green and blinks slowly. • The master SCM in slot 1 fails, the CSS does not boot unless there is a passive SCM in slot 2. 5. Disk activity Green Variable blinking If an error occurs during a power-on self-test, the console displays an error message, increments the detected error counter, and continues to the next test until the CSS completes all of the power-on self tests. See Appendix A, Troubleshooting the Boot Process, for more information on boot errors and messages. Logging in to the CSS After the CSS completes the boot process, it displays the login banner, copyright, and login prompt. When a startup-config file is present, the CSS displays the message: Press CTRL-C to abort running the startup-config OL-6037-01 Cisco Content Services Switch Getting Started Guide 1-9