Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 106
Removing or Replacing a PCI Hot Plug xpansion Board, If replacing the board
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
4-38 Compaq ProLiant 8500 Servers Setup and Installation Guide Removing or Replacing a PCI Hot Plug Expansion Board 1. Open the top access door. 2. Use the PCI Hot Plug Button or software application to turn power off to the slot. The green LED will flash during the power down transition and will turn off when power down is complete. For details of PCI Hot Plug LED indicators, see "PCI Hot Plug LEDs" earlier in this chapter. CAUTION: DO NOT open the slot release lever unless the slot's green PCI Hot Plug LED indicator is off. System power down and subsequent data loss could occur. 3. When the slot's green LED is off, disconnect cables to the PCI board. 4. Open the slot release lever and the L-shaped slot keeper. 5. Remove or replace the board. 6. If only removing the board, install an expansion slot cover. 7. If replacing the board, connect the cables to the PCI board. 8. Close the slot release lever. Ensure that the lever latches into the closed position. 9. If replacing, return power to the slot through the PCI Hot Plug Button or application. The green LED will flash during the power up transition and will turn on when power up is complete. For details on PCI Hot Plug LED indicators, see "PCI Hot Plug LEDs" earlier in this chapter. 10. Close the top access panel.