Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 77
module socket. Install, Align the new processor power module with the processor power
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Installing Hardware Options 4-9 NOTE: The Pentium III Xeon processor and processor power modules are keyed to ensure correct alignment. Refer to the option documentation for the latest bus/core ratio switch settings. 8. Align the new processor power module with the processor power module socket. Install 1 and secure the processor power module by rotating the ejector levers inward 2. You should hear the ejectors click into a locked position. CAUTION: The processor power module must be installed before the accompanying Pentium III Xeon processor. Attempting to install the processor power module after the Pentium III Xeon processor has been installed could damage the electronic components on the processor power module. 2 1 3 4 Figure 4-9. Installing the processor power module