Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 140
Running System Diagnostics, At the Diagnostics and Utilities menu select Test Computer.
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Initial Startup and Troubleshooting 8-5 IMPORTANT: To check System Interconnect Status Indicator LEDs, the server should be placed in Standby with the power supplies plugged in. Running System Diagnostics 1. Make sure there is good facility power applied to the server. 2. With the power to the server still turned off, check the LEDs on the power supplies: The top LED should be OFF (clear). The bottom LED should be ON (solid green). 3. Turn on the power to the machine. During the Power-On Self-Test (POST), press F10 to start the Compaq System Diagnostics. 4. At the Main Menu, select Diagnostics and Utilities. 5. At the Diagnostics and Utilities menu select Test Computer. 6. Select a test: Quick Check runs a select set of tests. The time required for the test depends on the server configuration; it could require up to two hours. This test does require less time than the Automatic Diagnostics Automatic Diagnostics runs a complete set of system tests. This test could require several hours. If errors occur, refer to the "Diagnostics Tools" chapter of the Compaq Servers Troubleshooting Guide for details on other diagnostic options.