Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 45
Installing the Slide Rail Assembly to the Rack, following
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Server Installation 2-19 Installing the Slide Rail Assembly to the Rack To install the slide rail assembly: 1. Place a mounting bracket in position according to the pencil marks made earlier. 2. Attach the front of the bracket on the inside of the front of the rack with one M6 x 1.0-12L Phillips screw in the bottom hole as shown in the following figure. Do not use washers. IMPORTANT: Use one screw only in the bottom hole of the bracket; otherwise, proper alignment is impossible. Figure 2-13. Attaching slide rail assembly to the front of the rack
Server Installation
2-19
Installing the Slide Rail Assembly to the Rack
To install the slide rail assembly:
1.
Place a mounting bracket in position according to the pencil marks made
earlier.
2.
Attach the front of the bracket on the inside of the front of the rack with
one M6 x 1.0-12L Phillips screw in the bottom hole as shown in the
following figure.
Do not use washers.
IMPORTANT:
Use one screw only in the bottom hole of the bracket; otherwise, proper
alignment is impossible.
Figure 2-13.
Attaching slide rail assembly to the front of the rack