Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 54
Powering Up the Server, SmartStart and System Configuration programs.
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
2-28 Compaq ProLiant 8500 Servers Setup and Installation Guide 4. Bundle all of the cables, including the power cables, and secure them to the cable management arm using the attached velcro loops. Figure 2-22. Routing and securing the cables 5. If you are going to route cables to the other side of the rack, attach the bundled cables to the cable support and join the other cables in the opposite cable channel. 6. Extend the bundled cables down the rack's cable channel. Powering Up the Server You can now bring your ProLiant 8500 server online in accordance with your network and operating system procedures. Press the momentary Power On/Standby switch to turn the system on. The power LED may blink for a few seconds until full power is on. If this LED turns amber, extend the server on its rails and check the System Interconnect Status Indicators. Refer to Table 3-2 to identify the source of the problem. When the system is first powered on, the system ROM detects the unconfigured state of the hardware and provides default configuration settings for most devices. By providing this initialization, the system can run Diagnostics and other software applications before running the normal SmartStart and System Configuration programs.