Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 78
Turn on the server. See Server Installation. If the system
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
4-10 Compaq ProLiant 8500 Servers Setup and Installation Guide 9. Align the new Pentium III Xeon processor with the processor socket. Install the processor 1, and rotate the ejector levers inward 2 to fully seat and lock the processor. 2 2 1 Figure 4-10. Installing the Pentium III Xeon processor NOTE: If you have installed processors to a total of five or more, you must install Cache Accelerator modules. See the next section, "Installing the Cache Accelerator." 10. Replace the Processor and Memory module into the chassis. 11. Turn on the server. See Chapter 2, "Server Installation." If the system does not power up, open the top access, and verify that the system interlock LEDs are normal. See Table 3-2, "System Interlock Status Indicators" in Chapter 3, "Server Operation." 12. Verify that the processor was installed correctly. Check the processor frequency, cache size, and socket location by reviewing the POST messages on the system console or processor information under the System Information Menu of the IMD. See Chapter 7, "Integrated Management Log."