Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 110
The Option ROM-based Array Configuration Utility is used to help
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
5-2 Compaq ProLiant 8500 Servers Setup and Installation Guide The location of the external connector for Port 1 is shown in the following figure. 1 Figure 5-1. External SCSI Connector 1 If you wish to use a SCSI controller other than the integrated controller for the internal hard drives, you can bypass the internal controller using the Integrated Array Bypass Kit and an optional controller such as the Compaq 3200 Array Controller. See the following section, "Installing the Integrated Array Bypass" for installation instructions. For external RAID support, use an array controller such as the Compaq 3200 Array Controller. The Option ROM-based Array Configuration Utility is used to help you configure the hardware in the way that best suits your needs. CAUTION: It is recommended that any time you move drive arrays or change your configuration you should back up the data.