Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 118
RAID Level and Stripe Size Migration, Errors and Warnings
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
5-10 Compaq ProLiant 8500 Servers Setup and Installation Guide RAID Level and Stripe Size Migration Use the Online RAID Level or Stripe Size Migration screen to: s Reconfigure a currently configured logical drive to a new fault-tolerance (RAID) level s Change an existing logical drive's stripe size to a new stripe size Both can be done online on Windows NT 4.0 or NetWare 5.0 without causing any data loss. They can also be performed offline on other operating systems by booting the SmartStart CD and running the ACU. Errors and Warnings When you start the Array Configuration Utility, the software checks each controller to detect errors in its configuration. If a problem is found, the Array Configuration Utility displays an error or warning message that describes the problem. Error and warning messages include instructions to correct configurations. If a warning message indicates "Internal Error Has Occurred" and cites an error code number, the problem requires assistance from Compaq technical support. See "About This Guide" at the beginning of this book for technical support phone numbers. Alternate Sources of the Array Configuration Utility Accessing On-line If the server you are configuring is running under Windows NT or NetWare, you can install and run the configuration utility online. Windows NT When you install the Windows NT Software Support Diskette (SSD), it prompts you to insert the second Array Configuration Utility diskette to install the utility. A program icon is created automatically. Select the icon to run the Array Configuration Utility. The Windows NT online Array Configuration Utility requires that at least one logical drive was previously configured while offline.