Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 113
array controller board as shown in the following
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
SCSI Setup 5-5 7. Install the optional SCSI controller board as shown in the following figure. 3 1 2 Figure 5-4. Installing the SCSI controller board 8. Connect the Integrated Array Bypass assembly cable to the optional array controller board as shown in the following figure. 1 2 Figure 5-5. Connecting the Integrated Array Bypass assembly cable NOTE: The actual appearance and routing of the cable in the preceding figure depends on which slot the optional array controller board occupies. 9. Close the top access panel and power up the server. 10. Configure the new controller with the ACU as described later in this chapter.
SCSI Setup
5-5
7.
Install the optional SCSI controller board as shown in the following
figure.
3
1
2
Figure 5-4.
Installing the SCSI controller board
8.
Connect the Integrated Array Bypass assembly cable to the optional
array controller board as shown in the following figure.
1
2
Figure 5-5.
Connecting the Integrated Array Bypass assembly cable
NOTE:
The actual appearance and routing of the cable in the preceding figure depends
on which slot the optional array controller board occupies.
9.
Close the top access panel and power up the server.
10.
Configure the new controller with the ACU as described later in this
chapter.