Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 82
Adding or Replacing Memory, reaches the stops. See Server Operation.
![]() |
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
4-14 Compaq ProLiant 8500 Servers Setup and Installation Guide CAUTION: Use only Compaq DIMMs. DIMMs from other sources may affect data integrity adversely. To install more memory, refer to one of the following installation sources: s For a detailed text and illustrated procedure, refer to the documentation provided with the DIMM option kit. s For an illustrated overview of the installation procedure, refer to the Hardware Installation and Configuration poster included in the shipping box and on the label located on the inside of the Processor and Memory module. s For an overview of memory installation, see the following procedure. Adding or Replacing Memory The memory board connects to the processor board, which is located inside the Processor and Memory module. To remove a memory board: 1. If the server is on, place it in Standby. See Chapter 2, "Server Installation." 2. Slide the Processor and Memory module out of the server until it reaches the stops. See Chapter 3, "Server Operation." WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them.
![](/manual_guide/products/compaq-proliant-8500-compaq-proliant-8500-setup-installation-guide-ab59566/82.png)