Dell 5200n Mono Laser Printer Dell™ Workgroup Laser Printer M5200 Us - Page 44

Storing print media, Card stock

Get Dell 5200n Mono Laser Printer PDF manuals and user guides View all Dell 5200n Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

the adhesive at least 1 mm (0.04 in.) away from edges. Adhesive material contaminates your printer and could void your warranty. If zone coating of the adhesive is not possible, a 3 mm (0.125 in.) strip should be removed on the leading and driver edge, and a non-oozing adhesive should be used. Remove a 3 mm (0.125 in.) strip from the leading edge to prevent labels from peeling inside the printer. Portrait orientation is preferred, especially when printing bar codes. Do not use labels that have exposed adhesive. Card stock Card stock is single ply, and has a large array of properties, such as the moisture content, thickness, and texture, that can significantly affect print quality. See Identifying print media sources and specifications for information on the preferred weight for the grain direction of print media. Try a sample of any card stock you are considering using with the printer before purchasing a large quantity. See Print media types and weights for information on the preferred weight of print media. When printing on card stock: Set the Paper Type menu item in the Paper Menu to Card Stock from the operator panel or from the printer driver. Be aware that preprinting, perforation, and creasing can significantly affect the print quality and cause print media handling or jamming problems. Avoid using card stock that may release hazardous emissions when heated. Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer. We recommend the use of grain short card stock. Storing print media Use the following guidelines for proper print media storage. These help avoid print media feeding problems and uneven print quality: For best results, store print media in an environment where the temperature is approximately 21°C (70°F) and the relative humidity is 40%. Store cartons of print media on a pallet or shelf, rather than directly on the floor.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
the adhesive at least 1 mm (0.04 in.) away from edges. Adhesive material contaminates your printer
and could void your warranty.
If zone coating of the adhesive is not possible, a 3 mm (0.125 in.) strip should be removed on the
leading and driver edge, and a non-oozing adhesive should be used.
Remove a 3 mm (0.125 in.) strip from the leading edge to prevent labels from peeling inside the
printer.
Portrait orientation is preferred, especially when printing bar codes.
Do not use labels that have exposed adhesive.
Card stock
Card stock is single ply, and has a large array of properties, such as the moisture content, thickness, and
texture, that can significantly affect print quality. See
Identifying print media sources and specifications
for
information on the preferred weight for the grain direction of print media.
Try a sample of any card stock you are considering using with the printer before purchasing a large quantity.
See
Print media types and weights
for information on the preferred weight of print media.
When printing on card stock:
Set the Paper Type menu item in the Paper Menu to Card Stock from the operator panel or from the
printer driver.
Be aware that preprinting, perforation, and creasing can significantly affect the print quality and cause
print media handling or jamming problems.
Avoid using card stock that may release hazardous emissions when heated.
Do not use preprinted card stock manufactured with chemicals that may contaminate the printer.
Preprinting introduces semi-liquid and volatile components into the printer.
We recommend the use of grain short card stock.
Storing print media
Use the following guidelines for proper print media storage. These help avoid print media feeding problems
and uneven print quality:
For best results, store print media in an environment where the temperature is approximately 21°C
(70°F) and the relative humidity is 40%.
Store cartons of print media on a pallet or shelf, rather than directly on the floor.