Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 107

enable Enter EXEC Privilege mode or any other privilege level configured. After entering this command, you may need to enter a password. C-Series, E-Series, S-Series, Z-Series Syntax Parameters enable [level] level (OPTIONAL) Enter a number for a privilege level of FTOS. Range: 0 to 15. Defaults Command Modes Command History 15 EXEC Version 8.3.11.1 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 E-Series Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information Related Commands Users entering EXEC Privilege mode or any other configured privilege level can access configuration commands. To protect against unauthorized access, use the enable password command to configure a password for the enable command at a specific privilege level. If no privilege level is specified, the default is privilege level 15. enable password - configures a password for the enable command and to access a privilege level. enable optic-info-update interval Enable polling intervals of optical information updates for simple network management protocol (SNMP). Z-Series, S4810 Syntax Parameters enable optical-info-update interval seconds To disable optical power information updates, use the no enable optical-infoupdate interval command. interval seconds Enter the keyword interval followed by the polling interval in seconds. Range: 120 to 6000 seconds. Default: 300 seconds (5 minutes). 107