Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1095

show ip ospf statistics Display OSPF statistics. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters show ip ospf process-id statistics global | [interface name {neighbor router-id}] process-id global interface name Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Enter the keyword global to display the packet counts received on all running OSPF interfaces and packet counts received and transmitted by all OSPF neighbors. (OPTIONAL) Enter the keyword interface followed by one of the following interface keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For Port Channel groups, enter the keywords portchannel followed by a number. For the C-Series and SSeries, the range is 1 to 128. For the E-Series, the range is 1 to 255 for TeraScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. neighbor routerid (OPTIONAL) Enter the keyword neighbor followed by the neighbor's router-id in dotted decimal format (A.B.C.D.). Defaults Command Modes none • EXEC • EXEC Privilege Command History Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 Introduced on the Z9000. Introduced on the S4810. Added support for Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. 1095