Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 64

Usage Information A system message appears stating that the bootflash image has been changed. You must reload the system before the system can switch to the new bootflash image. copy Copy one file to another location. FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip field). C-Series, E-Series, S-Series Syntax Parameters copy source-file-url destination-file-url Enter the following location keywords and information: file-url To copy a file from the internal FLASH To copy a file on an FTP server To copy a file from the internal FLASH on RPM0 To copy a file from the external FLASH on RPM0 To copy a file from the internal FLASH on RPM1 To copy a file from the external FLASH on RPM1 To copy the running configuration To copy the startup configuration To copy using a Secure Copy (SCP), enter flash:// followed by the filename enter ftp:// user:password@hostip/filepath enter rpm0flash://filepath enter rpm0slot0://filepath enter rpm1flash://filepath enter rpm1slot0://filepath enter the keyword running-config enter the keyword startup-config enter the keyword scp: • If you enter scp: in the source position, enter the target URL; • If you enter scp: in the target position, first enter the source URL; 64