Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 418

address family ipv4 multicast (MBGP) This command changes the context to subsequent address family identifier (SAFI). C-Series, E-Series TeraScale, S-Series Syntax address family ipv4 multicast To remove SAFI context, use the no address family ipv4 multicast command. Parameters ipv4 multicast Enter the keyword ipv4 to specify the address family as IPV4. Enter the keyword multicast to specify multicast as SAFI. Defaults Command Modes Command History IPv4 Unicast ROUTER BGP (conf-router_bgp) Version 7.8.1.0 Version 7.7.1.0 Introduced on the S-Series for MBGP IPv4 Multicast. Introduced on the C-Series. Usage Information After you execute this command, all subsequent commands apply to this address family. You can exit from this AFI/SAFI to the IPv4 Unicast (the default) family by entering exit and returning to the Router BGP context. aggregate-address Summarize a range of prefixes to minimize the number of entries in the routing table. C-Series, E-Series TeraScale, S-Series Syntax Parameters aggregate-address ip-address mask [advertise-map map-name] [asset] [attribute-map map-name] [summary-only] [suppress-map mapname] ip-address mask advertise-map map-name as-set Enter the IP address and mask of the route to be the aggregate address. Enter the IP address in dotted decimal format (A.B.C.D) and mask in /prefix format (/x). (OPTIONAL) Enter the keywords advertise-map followed by the name of a configured route map to set filters for advertising an aggregate route. (OPTIONAL) Enter the keyword as-set to generate path attribute information and include it in the aggregate. AS_SET includes AS_PATH and community information from the routes included in the aggregated route. attribute-map map-name (OPTIONAL) Enter the keywords attribute-map followed by the name of a configured route map to modify attributes of the aggregate, excluding AS_PATH and NEXT_HOP attributes. 418