Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 416

Example (S4810) Field State/Pfxrcd Description If the neighbor is in Established stage, the number of network prefixes received. If a maximum limit was configured with the neighbor maximumprefix command, (prfxd) appears in this column. If the neighbor is not in Established stage, the current stage is displayed (Idle, Connect, Active, OpenSent, OpenConfirm). When the peer is transitioning between states and clearing the routes received, the phrase (Purging) may appear in this column. If the neighbor is disabled, the phrase (Admin shut) appears in this column. FTOS#show ip bgp summary BGP router identifier 120.10.10.1, local AS number 100 BGP table version is 34, main routing table version 34 9 network entrie(s) using 1372 bytes of memory 5 paths using 380 bytes of memory 4 denied paths using 164 bytes of memory BGP-RIB over all using 385 bytes of memory 2 BGP path attribute entrie(s) using 168 bytes of memory 1 BGP AS-PATH entrie(s) using 39 bytes of memory 1 BGP community entrie(s) using 43 bytes of memory 2 neighbor(s) using 7232 bytes of memory Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/ Pfx 100.10.10.2 200 46 41 34 0 0 00:14:33 5 120.10.10.2 300 40 47 34 0 0 00:37:10 0 FTOS# show running-config bgp Use this feature to display the current BGP configuration. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Defaults Command Modes Command History show running-config bgp none EXEC Privilege Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.6.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. 416