Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1370

show running-config snmp - displays the SNMP running configuration. snmp-server group Configure a new SNMP group or a table that maps SNMP users to SNMP views. C-Series, E-Series, S-Series, Z-Series Syntax snmp-server group [group_name {1 | 2c | 3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access accesslist-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]] To remove a specified group, use the no snmp-server group [group_name {v1 | v2c | v3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]] command. Parameters group_name Enter a text string (up to 20 characters long) as the name of the group. The following groups are created for mapping to read/write community/security-names (defaults): • v1v2creadg - maps to a community/security-name with ro permissions. • 1v2cwriteg - maps to a community/security-name rw permissions. 1 | 2c | 3 auth noauth priv read name write name (OPTIONAL) Enter the security model version number (1, 2c, or 3): • 1 is the least secure version. • 3 is the most secure of the security modes. • 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. The default is 1. (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword noauth to specify no authentication of a packet. (OPTIONAL) Enter the keyword priv to specify both authentication and then scrambling of the packet. (OPTIONAL) Enter the keyword read followed by a name (a string of up to 20 characters long) as the read view name. The default is GlobalView and is assumed to be every object belonging to the Internet (1.3.6.1) OID space. (OPTIONAL) Enter the keyword write followed by a name (a string of up to 20 characters long) as the write view name. 1370