Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1332

Command Modes Command History Usage Information Related Commands EXEC Version 8.3.11.1 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the Z9000. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. If you want to log in without being prompted for a password, log in through RSA authentication. To do that, you must first add the SSHv2 RSA public keys to the list of authorized keys. This command adds the specified RSA keys to the following file: flash://ADMIN_DIR/ssh/ authorized-keys-username (where username is the user associated with this terminal). NOTE: The no form of this command deletes the file flash://ADMIN_DIR/ssh/ authorized-keys-username file. show ip ssh rsa-authentication - displays the RSA authorized keys. ip ssh rsa-authentication (Config) - enables RSA authentication. ip ssh server Configure an SSH server. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax NOTE: Some of the parameters in this command require licensing to access. For more information, contact your Dell Force10 representative. ip ssh server {enable | port port-number} [version {1 | 2}] To disable SSH server functions, use the no ip ssh server enable command. Parameters enable port port-number [version {1 | 2}] Enter the key word enable to start the SSH server. (OPTIONAL) Enter the keyword port followed by the port number of the listening port of the SSH server. The range is 1 to 65535. The default is 22. (OPTIONAL) Enter the keyword version followed by the SSH version 1 or 2 to specify only SSHv1 or SSHv2. NOTE: If you enable FIPS mode, you can only select version 2. Defaults Command Modes Command History Default listening port is 22. CONFIGURATION Version 8.3.11.1 Version 8.3.7.0 Introduced on the Z9000. Introduced on the S4810. 1332