Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 292

Related Commands match interface - redistributes routes that match the next-hop interface. match ip address - redistributes routes that match an IP address. match ip next-hop - redistributes routes that match the next-hop IP address. match ip route-source - redistributes routes that match routes advertised by other routers. match metric - redistributes routes that match a specific metric. match route-type - redistributes routes that match a route type. route-map Enable a route map statement and configure its action and sequence number. This command also places you in ROUTEMAP mode. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax route-map map-name [permit | deny] [sequence-number] To delete a route map, use the no route-map map-name [permit | deny] [sequence-number] command. Parameters map-name permit deny sequencenumber Enter a text string of up to 140 characters to name the route map for easy identification. (OPTIONAL) Enter the keyword permit to set the route map default as permit. If you do not specify a keyword, the default is permit. (OPTIONAL) Enter the keyword deny to set the route map default as deny. (OPTIONAL) Enter a number to identify the route map for editing and sequencing with other route maps. You are prompted for a sequence number if there are multiple instances of the route map. The range is 1 to 65535. Defaults Command Modes Command History Not configured. If you do not define a keyword (permit or deny) for the route map, the permit action is the default. CONFIGURATION Version 8.3.11.1 Version 8.3.7.0 Version 8.1.1.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. 292