Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1447

dei mark Set the DEI value on egress according to the color currently assigned to the packet. C-Series, S-Series, Z-Series, S4810 Syntax Parameters dei mark {green | yellow} {0 | 1} 0 | 1 green | red | yellow Enter the bit value you want to map to a color. Choose a color: • Green: High priority packets that are the least preferred to be dropped. • Yellow: Lower priority packets that are treated as besteffort. Defaults Command Modes Command History Usage Information Related Commands All the packets on egress are marked with DEI 0. INTERFACE Version 8.3.11.1 Version 8.3.7.0 Version 8.3.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. You must first enable DEI for this configuration to take effect. dei enable - enables DEI. member Assign a stackable VLAN access or trunk port to a VLAN. The VLAN must contain the vlan-stack compatible command in its configuration. C-Series, E-Series, S-Series, Z-Series Syntax Parameters member interface To remove an interface from a Stackable VLAN, use the no member interface command. interface Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. 1447