Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 357

description Enter a description of the BGP routing protocol C-Series, E-Series, S-Series, Z-Series, S4810 Syntax description {description} To remove the description, use the no description {description} command. Parameters description Enter a description to identify the BGP protocol (80 characters maximum). Defaults Command Modes Command History none ROUTER BGP Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 pre-7.7.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced. Related Commands router bgp - enters ROUTER mode on the switch. distance bgp Define an administrative distance for routes. C-Series, E-Series TeraScale, Z-Series, S-Series Syntax distance bgp external-distance internal-distance local-distance To return to default values, use the no distance bgp command. Parameters external-distance internal-distance local-distance Enter a number to assign to routes learned from a neighbor external to the AS. The range is 1 to 255. The default is 20. Enter a number to assign to routes learned from a router within the AS. The range is 1 to 255. The default is 200. Enter a number to assign to routes learned from networks listed in the network command. The range is 1 to 255. The default is 200. Defaults • external-distance = 20 • internal-distance = 200 • local-distance = 200 357