Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1239

Usage Information Related Commands This command ensures that route information being redistributed is converted to the same metric value. redistribute - allows you to redistribute routes learned by other methods. description Enter a description of the RIP routing protocol. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters Defaults Command Modes Command History Related Commands description {description} To remove the description, use the no description {description} command. description Enter a description to identify the RIP protocol (80 characters maximum). none ROUTER RIP Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 pre-Version 7.7.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. router rip - enters ROUTER mode on the switch. distance Assign a weight (for prioritization) to all routes in the RIP routing table or to a specific route. Lower weights ("administrative distance") are preferred. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax distance weight [ip-address mask [prefix-name]] To return to the default values, use the no distance weight [ip-address mask] command. 1239