Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 518

debug ip bgp ipv6 unicast updates View information about BGP updates. E-Series Syntax debug ip bgp ipv6 unicast ipv6-address prefix-length updates [in | out] To disable debugging, use the no debug ip bgp ipv6 unicast ipv6-address prefix-length updates [in | out] command. Parameters ipv6-address prefix-length Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x format. The range is /0 to /128. NOTE: The :: notation specifies successive hexadecimal fields of zeros. updates in out Enter the keyword updates to view BGP update information. (OPTIONAL) Enter the keyword in to view only BGP updates received from neighbors. (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors. Defaults Command Modes Command History Disabled. EXEC Privilege Version 7.4.1.0 Introduced distance bgp Define an administrative distance for routes. E-Series Syntax distance bgp external-distance internal-distance local-distance To return to default values, use the no distance bgp command. Parameters external-distance internal-distance local-distance Enter a number to assign to routes learned from a neighbor external to the AS. The range is 1 to 255. The default is 20. Enter a number to assign to routes learned from a router within the AS. The range is 1 to 255. The default is 200. Enter a number to assign to routes learned from networks listed in the network command. The range is 1 to 255. The default is 200. Defaults • external-distance = 20 518