Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1425

50 System Time and Date The commands in this chapter configure time values on the system, either using the Dell Force10 operating software (FTOS), or the hardware, or using the network time protocol (NTP). With NTP, the switch can act only as a client to an NTP clock host. For more information, refer to the "Network Time Protocol" section of the Management chapter in the FTOS Configuration Guide. The commands in this chapter are generally supported on the C-Series, E-Series, Z-Series, and S-Series, with some exceptions, as notes in the Command History fields. calendar set Set the time and date for the switch hardware clock. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters calendar set time month day year time month day year Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format; for example, 17:15:00 is 5:15 pm. Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. Enter the number of the day. The range is 1 to 31. You can enter the name of a month to change the order of the display to time day month year. Enter a four-digit number as the year. The range is 1993 to 2035. Command Modes Command History EXEC Privilege Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. 1425