Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 784

ip address Assign a primary and secondary IP address to the interface. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters Defaults Command Modes Command History Usage Information ip address ip-address mask [secondary] To delete an IP address from an interface, use the no ip address [ip-address] command. ip-address mask secondary Enter an IP address in dotted decimal format. Enter the mask of the IP address in slash prefix format (for example, / 24). (OPTIONAL) Enter the keyword secondary to designate the IP address as the secondary address. Not configured. INTERFACE Version 8.3.11.1 Version 8.3.7.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. You must be in INTERFACE mode before you add an IP address to an interface. Assign an IP address to an interface prior to entering ROUTER OSPF mode. ip directed-broadcast Enables the interface to receive directed broadcast packets. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Defaults Command Modes Command History ip directed-broadcast To disable the interface from receiving directed broadcast packets, use the no ip directed-broadcast command. Disabled (that is, the interface does not receive directed broadcast packets) INTERFACE Version 8.3.11.1 Introduced on the Z9000. 784