Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 677

Command Modes Command History Usage Information Example detail (OPTIONAL) Enter the keyword detail to display the IGMPv3 source information. • EXEC • EXEC Privilege Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 E-Series legacy command. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series and C-Series. Expanded to support the detail option. This command displays the IGMP database, including configured entries for either all groups on all interfaces, all groups on specific interfaces, or specific groups on specific interfaces. The following describes the show ip igmp groups command shown in the Example below. Field Group Address Interface Mode Uptime Expires Last Reporter Member Ports Description Lists the multicast address for the IGMP group. Lists the interface type, slot and port number. Displays the IGMP version used. Displays the amount of time the group has been operational. Displays the amount of time until the entry expires. Displays the IP address of the last host to be a member of the IGMP group. Indicates the port channel. If the port channel is VLT, an asterisk (*) after the port channel number indicates the port channel is locally down and that a remote VLT port is up. FTOS#show ip igmp groups Total Number of Groups: 5 IGMP Connected Group Membership Group Address Interface Mode Uptime Expires Last Reporter 225.0.0.0 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51 Member Ports: Po 2 225.0.0.1 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51 Member Ports: Po 2 225.0.0.2 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51 Member Ports: Po 2 225.0.0.3 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51 Member Ports: Po 2 225.0.0.4 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51 Member Ports: Po 2 677