Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 347

capture bgp-pdu neighbor Enable capture of an IPv4 BGP neighbor packet. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax capture bgp-pdu neighbor ipv4-address direction {both | rx | tx} To disable capture of the IPv4 BGP neighbor packet, use the no capture bgp-pdu neighbor ipv4-address command. Parameters ipv4-address direction {both | rx | tx} Enter the IPv4 address of the target BGP neighbor. Enter the keyword direction and a direction-either rx for inbound, tx for outbound, or both. Defaults Command Modes Command History Not configured. EXEC Privilege Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.5.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced. Related Commands capture bgp-pdu max-buffer-size - specifies a size for the capture buffer. show capture bgp-pdu neighbor - displays BGP packet capture information. capture bgp-pdu max-buffer-size Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters capture bgp-pdu max-buffer-size 100-102400000 100-102400000 Enter a size for the capture buffer. Defaults Command Modes Command History 40960000 bytes. EXEC Privilege Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. 347