Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1128

show ipv6 ospf neighbor Display the OSPF neighbor information on a per-interface basis. C-Series, E-Series, Z-Series, S4810 Syntax Parameters show ipv6 ospf neighbor [interface] interface (OPTIONAL) Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: - C-Series, Z-Series, and S4810 Range: 1 to 128 - E-Series Range: 1 to 255 for TeraScale; 1 to 512 for ExaScale. • For a VLAN, enter the keyword vlan followed by the VLAN ID. Range: 1 to 4094. Defaults Command Modes Command History Example No default behavior or values. EXEC EXEC Privilege Version 9.1.(0.0) Version 7.8.1.0 Version 7.4.1.0 Introduced support for OSPFv3 on the S4810 and Z9000. Added support for the C-Series. Introduced on the E-Series. show ipv6 ospf interface command FTOS#show ipv6 ospf neighbor gi 9/0 Neighbor ID Interface 63.114.8.36 9/0 Pri State 1 FULL/DR Dead Time Interface 00:00:38 4 FTOS# ID Gi 1128