Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1292

Defaults Command Modes Command History Usage Information • line for LINE mode • route-map for ROUTE-MAP mode • router for ROUTER OSPF, ROUTER RIP, ROUTER ISIS and ROUTER BGP modes level level reset command Enter the keyword level followed by a number for the access level. The range is 0 to 15. Level 1 is EXEC mode and Level 15 allows access to all CLI modes and commands. Enter the keyword reset to return the security level to the default setting. Enter the command's keywords to assign the command to a certain access level. You can enter one or all of the keywords. Not configured. CONFIGURATION Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Use the enable password command to define a password for the level to which you are assigning privilege or access. privilege level (LINE mode) Change the access level for users on the terminal lines. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax privilege level level To delete access to a terminal line, use the no privilege level level command. Parameters level level Enter the keyword level followed by a number for the access level. The range is 0 to 15. Level 1 is EXEC mode and Level 15 allows access to all CLI modes. Defaults Command Modes Command History level = 15 LINE Version 8.3.11.1 Introduced on the Z9000. 1292