Dell Inspiron 7000 Dell Inspiron 7000 Service Manual - Page 42
NOTE: If the computer is booted with a diskette drive or secondary battery
View all Dell Inspiron 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
11. If present, remove the combo module or secondary battery from the options bay. Unlock the latch lock by flipping it toward the back of the computer (see Figure 4-11). Slide the latch release in the direction of the arrow. Keep holding the latch release with one hand while pulling the combo module or secondary battery straight out of the options bay with the other. latch lock (unlocked position) bottom of computer latch release combo module or secondary battery NOTE: If the computer is booted with a diskette drive or secondary battery in the options bay, you must reboot after installing the combo module in the options bay. Some of the computer's interface connectors are zero insertion force (ZIF) connectors. These connectors are not removable; they must be released to disconnect a cable from them. To disconnect a cable from a ZIF connector, follow these steps: 1. Insert a small flat-blade screwdriver or dental pick under the movable part of the connector (see Figure 4-12). For most ZIFs, carefully pry up first one end of the movable part of the connector and then the other end. Some ZIFs may need to be lifted in the center. 4-8