Dell Inspiron 7000 Dell Inspiron 7000 Service Manual - Page 93
When reinstalling the processor board, align the board with the notch on
View all Dell Inspiron 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
5. Inspect the thermal pad beneath the memory module to see if it needs replacement. When reinstalling the SODIMM heat sink, be careful to align the hole in the SODIMM heat sink over the metal clip soldered to the system board. When reinstalling the processor board, align the board with the notch on the system board connector. Press down on the left side of the board over the system board connector. This is the best spot to apply pressure to seat the processor correctly on connector JP15. Removing and Replacing Parts 4-59
Removing and Replacing Parts
4-59
5.
Inspect the thermal pad beneath the memory module to see if it needs
replacement.
When reinstalling the SODIMM heat sink, be careful to align the hole in the
SODIMM heat sink over the metal clip soldered to the system board.
When reinstalling the processor board, align the board with the notch on the
system board connector. Press down on the left side of the board over the sys-
tem board connector. This is the best spot to apply pressure to seat the
processor correctly on connector JP15.