Denon AVR 4806 Owners Manual - Page 106
Setting the Power Amplifier Assignment, Power Amp Assign at the Option Setup
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Advanced Setup - Part 1 Setting the Power Amplifier Assignment • AVR-4806's power amplifiers for seven channels (except the front channel), can be assigned to any channels in the MAIN ZONE, ZONE2 or ZONE3 and output to the speakers. In this way, power amplifiers not being used in the MAIN ZONE can be assigned for multi-zone use, the front speakers can be connected with a "Bi-Amp", etc., so you can create the desired speaker system. The available power amplifier channels that can be reassigned may differ, according to settings previously made in the "Channel Setup" menu ( page 105). 1 Press the CURSOR D or H button to select the "Power Amp Assign" at the "Option Setup" menu, then press the ENTER button. • Display the "Power Amp Assign" screen. 2 Press the CURSOR D or H button to select the power amplifier to be assigned, then press the CURSOR F or G button to select which channel to assigned the amplifier to. Center: If no center speaker is connected in the main room, the center speaker power amplifier channel can be assigned to either ZONE2 or ZONE3 if set to "Mono" at "Channel Setup". • ZONE2: The second zone's mono output is provided by the center speaker's power amplifier. • ZONE3: The third zone's mono output is provided by the center speaker's power amplifier. • - - -: No signals are output from the center speaker's power amplifier channel. Surr. A: The Surround A power amplifier channels can be assigned if Surround B is not activated in the main room (MAIN ZONE). • Front: This provides a bi-amp mode for the two main front speakers, replicating the front left and front right amplifier channels' outputs. • Front B: The surround A power amplifier channels can be used to provide a second set of stereo outputs that match the front left and right speakers, providing a Speaker B option for stereo sound in another location ( page 101). • ZONE2: This mode assigns the Surround A amplifier channels to provide ZONE2 speaker-level outputs from the Surround A speaker terminals, with the option of monaural or stereo operation depending on the "Channel Setup" setting. • ZONE3: This mode assigns the Surround A amplifier channels to provide ZONE3 speaker-level outputs from the Surround A speaker terminals, with the option of monaural or stereo operation depending on the "Channel Setup" setting. • - - -: No signals are output from the Surround A speaker terminals. Surr. B: The Surround B amplifier channels can be reassigned if they are not being used in the main room, and the Surround A amplifier channels are assigned to either the surround channels or to the front channels. • Front B: This mode sets the Surround B amplifier channels to drive a second set of stereo outputs that match the front left and right speakers, providing a Speaker B option for stereo sound in another location ( page 101). • - - -: No signals are output from the surround back speaker terminals. 106