Denon AVR 4806 Owners Manual - Page 82
Zone2 Select, Function, Zone3/rec Select, Source Off, Mode Selector, Muting, Volume
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Advanced Operation FUNCTION ZONE3/REC SELECT SOURCE OFF MODE SELECTOR SOURCE ON FUNCTION ZONE2 SELECT VOLUME MUTING Outputting a program source to an amplifier, etc., in a ZONE2 room (ZONE2 SELECT mode) Outputting a program source to an amplifier, etc., in a ZONE3 room (ZONE3 SELECT mode) 1 Press the ZONE2 SELECT button to display the "ZONE2 SOURCE" on the display. 2 Turn the FUNCTION knob to select the source you want to output appears on the display. 3 Start playing the source to be output. For operating instructions, refer to the manuals of the respective components. 1 Press the ZONE3/REC SELECT button to display the "ZONE3 SOURCE" on the display. • The MULTI indicator light. The display switches as follows each time the button is pressed. ZONE3 RECOUT 2 Turn the FUNCTION knob to select the source you want to output appears on the display. 3 Start playing the source to be output. For operating instructions, refer to the manuals of the respective components. • The signals of the source selected in the ZONE3 mode are also output from the VCR-1, VCR-2, VCR-3 and CDR/TAPE recording output terminals. • Digital signals are not output from the ZONE2 and ZONE3 audio output terminals. • About the MULTI ZONE connections ( page 80, 81). • Digital outputs of the OPTICAL2, 3 and 4 OUT normally switch in association with the ZONE3/REC SELECT mode, but if "ZONE2 SELECT" is selected at "Digital Out Assign", the source switches in association with the "ZONE2 SELECT" mode for the OPTICAL2 OUT digital output connector ( page 111). 82