Denon AVR 4806 Owners Manual - Page 150
Specifications, Audio
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Specifications 2 Audio section • Power amplifier Rated output: Front: 140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) Center: 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 165W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) Surround (A, B): 140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) Surround Back: 140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) Dynamic power: 180 W x 2 ch (8 Ω/ohms) 280 W x 2 ch (4 Ω/ohms) Output terminals: Front, Center, Surr. Back 6 ~ 16 Ω/ohms Surround: A or B 6 ~ 16 Ω/ohms A + B 8 ~ 16 Ω/ohms • Analog Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz: +0, -3 dB (DIRECT mode) S/N: 102 dB (DIRECT mode) Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V • Digital D/A output: Rated output - 2 V (at 0 dB playback) Total harmonic distortion - 0.005 % (1 kHz, at 0 dB) S/N ratio - 110 dB Dynamic range - 108 dB Digital input: Format - Digital audio interface • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output / Maximum output: 150 mV / 8 V Distortion factor: 0.03% (1 kHz, 3 V) 2 Video section • Standard video terminals Input / output level and impedance: Frequency response: • S-Video terminals Input / output level and impedance: Frequency response: • Color component video terminal Input / output level and impedance: Frequency response: 1 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB/CB signal - 0.7 Vp-p, 75 Ω/ohms PR/CR signal - 0.7Vp-p, 75 Ω/ohms 5 Hz ~ 100 MHz - +0, -3 dB 150