Denon AVR 4806 Owners Manual - Page 115
Setting the Delay Time, Preparations, Assignment of low frequency signal range, Subwoofer Setup
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
2 Assignment of low frequency signal range • The only signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low frequency signal range of channels set to "Small" in the setup menu. The low frequency signal range of channels set to "Large" are produced from those channels. Advanced Setup - Part 2 1 Press the CURSOR D or H button to select the "Delay Time" at the "Speaker Setup" menu, then press the ENTER button. • Display the "Delay Time" screen. 2 Subwoofer Setup • The subwoofer mode setting is only valid when and "Yes" is set for the subwoofer in the "Speaker Configuration" settings ( page 113, 114). • When the input signal is analog or a PCM signal not including LFE signals, if "LFE-THX-" is selected, the low frequency component is not output from the subwoofer. To output the subwoofer channel, select "LFE+Main". 2 Press the CURSOR F or G button to select the desired unit, "Meters" or "Feet". • The "Delay Time" screen appears automatically. Setting the Delay Time Example: When "Feet" is selected • Input the distance between the listening position and the different speakers to set the delay time for the surround mode. • Two surround back speakers are required to use the THX Ultra2 Cinema, THX Music mode and THX Games mode. Set the surround back speakers so that the distance to the listening position is the same for both the left and right speakers. It is also recommended that the deviations of the distance from the listening position to L and R channel speakers (front left (FL) and front right (FR), surround left (SL) and surround right (SR), surround back left (SBL) and surround back right (SBR)) is less than 2 ft (60 cm). ......... L1 ......... L2 ......... L3 ......... L4 Preparations: Measure the distances between the listening position and the speakers (L1 to L11 on the diagram at the below). FL C FR ......... L5 ......... L6 ......... L7 ......... L8 ......... L9 ....... L10 3 Press the CURSOR D or H button to select the speaker to be set. SW L1 L3 L2 Listening position L4 L5 L6 SLA L7 L9 L10 L8 SRA SLB L11 SRB SBL SBR 115