Denon AVR 4806 Owners Manual - Page 126

Advanced Setup - Part 2 System setup items and default values (set upon shipment from the factory) 1. Auto Setup/Room EQ 1 Auto Setup 2 Room EQ Setup 3 Direct Mode Setup 4 Mic Input Select Auto Setup / Room EQ This unit performs an analysis of the speaker system and measures the acoustic characteristics of your room to permit an appropriate automatic setting. Set the Room EQ setting with All or Assign for each surround mode. Set the ON/OFF setting of Room EQ, in the case of the surround mode is in "Direct" or "Pure Direct". Set this to switch the Mic Input jack for use for Mic or V.AUX L-channel input terminal. Default settings - All, Room EQ = OFF OFF Mic Page 19~25 122 123 123, 124 2. Speaker Setup Speaker Setup Default settings Page Input the combination of speakers in your system and their 1 Speaker Configuration corresponding sizes (SMALL for regular speakers, LARGE for full-size, full-range) to automatically set the composition of the signals output from the speakers and the frequency response. Front Sp. Small Center Sp. Small Subwoofer Yes Surround Sp. A / B Small Surround Back Sp. Small / 2spkrs 113, 114 2 Subwoofer Setup This selects the subwoofer for playing deep bass signals. LFE -THX- 114, 115 3 Delay Time This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. Front L & R 12 ft (3.6 m) Center 12 ft (3.6 m) Subwoofer 12 ft (3.6 m) Surround L & R (A) 10 ft (3.0 m) Surround L & R (B) 10 ft (3.0 m) Surround Back 10 ft (3.0 m) 115, 116 4 Channel Level This adjusts the volume of the signals output from the Front Front speakers and subwoofer for the different channels in order L R to obtain optimum effects. 0 dB 0 dB Center 0 dB Surround L Surround R Surround Back L Surround Back R Subwoofer 116~118 0 dB 0 dB 0 dB 0 dB 0 dB 5 Crossover Frequency Set the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer. FIXED -THX- 118, 119 Surround 6 Speaker Setup 7 THX Audio Setup Use this function when using multiple surround speaker combinations for more ideal surround sound. Once the combinations of surround speakers to be used for the different surround modes are preset, the surround speakers are selected automatically according to the surround mode. Surround mode Surround speaker THX/DOLBY/ THX/DOLBY/ THX/ WIDE 7 CH DSP MULTI CH DTS CINEMA DTS MUSIC DOLBY GAME SCREEN STEREO SIMULATION MODE A A A A A A A 119, 120 Boundary Gain compensation When using a THX Ultra2 compatible subwoofer, set the subwoofer's frequency response. THX Ultra2 Subwoofer = NO 120 Surround Back Speaker Position When using two surround back speakers, set the distance of the two speakers. The Distance Between SBL/SBR = 0 ft to 1 ft (0 m to 0.3 m) 121 126