Denon AVR 4806 Owners Manual - Page 119
Selecting the Surround Speakers for the, different surround modes, Setting the crossover frequency
UPC - 081757506465
View all Denon AVR 4806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
• If "LFE+Main" is set at "Subwoofer Setup", "SW:LFE+Main" ( page 114, 115) is displayed at the top right of the screen. Advanced Setup - Part 2 3 Press the CURSOR F or G button to select the frequency. • Please set all THX Certifies speakers to small and the crossover to 80Hz. • We recommend using with the crossover frequency set to "FIXED-THX-", but depending on the speaker, setting it to a different frequency may improve frequency response near the crossover frequency. • The crossover frequency mode is valid only when subwoofer is set to ON, and when one or more speakers are set to SMALL, as described in section "Speaker Configuration" settings ( page 113, 114). • If "LFE-THX-" is selected at "Subwoofer Setup", the frequencies can only be selected for speakers set to "Small" at "Speaker Configuration". Setting the crossover frequency individually for the different channels • If "LFE+Main" is set at "Subwoofer Setup", the frequencies can be selected regardless of the speaker size setting. 1 Press the CURSOR F or G button to select the "Advanced" at the "Crossover Frequency" screen. Selecting the Surround Speakers for the different surround modes • This menu is displayed when both surround speakers A and B are used. • At this screen preset the surround speakers to be used in each surround modes. 2 Press the CURSOR D or H button to select the speaker to be set. 1 Press the CURSOR D or H button to select the "Surround Sp Setup" at the "Speaker Setup" menu, then press the ENTER button. • Display the "Surround Sp Setup" screen. 119